A P0761 code in your 2023 Dodge Durango indicates that shift solenoid C is stuck in the off position or has performance issues preventing proper activation. Your Durango uses an 8-speed TorqueFlite automatic where shift solenoid C controls specific higher-gear applications.
Shift Solenoid C Stuck Off
When solenoid C is stuck off, the hydraulic circuit it controls cannot be engaged. This affects specific gear applications that require solenoid C to be on—typically higher gears used during highway driving. The transmission may skip those gears or have harsh engagement.
Common Causes
A mechanically stuck solenoid that won't activate. Debris blocking the solenoid valve. Electrical failure preventing the solenoid from energizing. Valve body issues affecting solenoid operation. Low line pressure preventing proper solenoid function.
Symptoms in Your Durango
Higher gear shifts may be delayed, harsh, or absent. The transmission may not reach top gear for fuel-efficient highway cruising. RPM may remain higher than expected at highway speeds. Check engine light with P0761 stored. Lower gears may work normally.
Chrysler Diagnostic Approach
Using Chrysler wiTECH, monitor shift solenoid C command versus response. Check for proper activation in higher gear ranges. Test solenoid electrically—it should click when commanded. Verify valve body operation. Check ZF 8HP transmission fluid level and condition.