P0441 Code: 2022 Mitsubishi – What It Means & Cost to Fix

2022 Mitsubishi Outlander P0441: EVAP Purge Flow on the All-New Outlander

Uncovering P0441 in Your 2022 Mitsubishi Outlander

Your 2022 Mitsubishi Outlander — the all-new fourth generation on the Nissan-Renault CMF-C/D platform (shared with the Nissan Rogue) with the 2.5-liter four-cylinder (181 hp) and CVT — has triggered P0441 for incorrect EVAP purge flow. As a first-year redesign on a Nissan-shared platform, the 2022 Outlander uses Nissan-influenced EVAP architecture. P0441 means the ECM detected abnormal fuel vapor purge flow during self-testing.

Symptoms You Might Notice

  • Steady check engine light
  • Normal 2.5L four-cylinder power
  • AWD (S-AWC) working normally
  • Possible fuel odor near the rear
  • Emissions test failure

Common Causes — Ranked

1. Purge Control Solenoid

The purge control solenoid manages vapor flow from the charcoal canister to the 2.5L engine's intake manifold. On the new CMF-C/D platform, this component is Nissan-derived. After a couple of years, valve sticking is the most common failure mode.

2. ECM Software Calibration

As a first-year redesign on a new platform, the 2022 Outlander may have initial EVAP calibrations that needed refinement. Mitsubishi has likely released TSBs addressing early software issues.

3. Canister Vent Control Valve

The vent control valve seals the EVAP system during self-tests. Located near the charcoal canister, road exposure degrades it over time.

4. EVAP Hose or Connection

The Outlander's three-row body routes EVAP lines from the rear to the engine bay. First-year assembly quality can result in marginally tight connections.

5. Gas Cap Seal

Standard O-ring deterioration. Check first as the simplest fix.

Diagnostic Steps

  1. Check gas cap — tighten or replace ($12–$30)
  2. Scan with MUT-III (dealer) or compatible OBD-II scanner
  3. Check for ECM updates and TSBs for 2022 Outlander
  4. Test purge control solenoid
  5. Test canister vent control valve
  6. Smoke test if needed

Repair Cost Breakdown

  • Purge control solenoid: $100 – $230
  • ECM software update: $0 – $130
  • Canister vent control valve: $90 – $220
  • EVAP hose repair: $70 – $180
  • Gas cap: $12 – $30

Can I Drive With P0441?

Yes. Your Outlander's engine, S-AWC, and all features work normally. P0441 is emissions-only.

DIY vs Professional

Your 2022 Outlander is within Mitsubishi's 5-year/60,000-mile basic warranty and 10-year/100,000-mile powertrain warranty. Dealer service is the no-cost path. MUT-III diagnostics provide Mitsubishi-specific EVAP testing. Parts costs are among the lowest in the segment. Federal emissions warranty (8 years/80,000 miles) provides additional coverage, though Mitsubishi's basic warranty already exceeds it.

Got Another Mystery?

"The game is afoot!" Let our AI detective investigate your next automotive case.

Open a New Case