2019 GMC Acadia P0101 Code: MAF Sensor Diagnosis & Repair Guide

Decoding P0101 on Your 2019 GMC Acadia

The P0101 code on your 2019 GMC Acadia indicates the Mass Air Flow sensor readings are outside expected parameters. Your second-generation Acadia's engine depends on accurate MAF data. Let's investigate.

Symptoms You May Notice

• Check engine light on
• Rough or hunting idle
• Reduced power
• Sluggish acceleration
• Lower fuel economy
• Hesitation during throttle input

Most Likely Causes

1. Dirty MAF sensor (48% of cases) - Accumulated contamination
2. Air filter restriction (20% of cases) - Filter needs replacement
3. Intake system leak (17% of cases) - Unmetered air entering
4. MAF sensor failure (10% of cases) - Component worn
5. Wiring issues (5% of cases) - Connector problems

Diagnostic Approach

1. Scan for all codes
2. Inspect air filter condition
3. Check intake connections
4. Examine MAF connector
5. Clean MAF sensor
6. Monitor data during test drive

Repair Costs

• MAF cleaner: $8-15
• Air filter: $22-48
• MAF sensor (OEM): $135-235
• MAF sensor (aftermarket): $55-115
• Labor: $65-120

DIY MAF Cleaning

1. Locate MAF sensor in intake tube
2. Disconnect electrical connector
3. Remove sensor from housing
4. Spray with MAF cleaner
5. Let dry 15+ minutes
6. Reinstall and clear codes

Warranty Note

GMC's 3-year/36,000-mile basic warranty has expired. The 5-year/60,000-mile powertrain warranty may still apply.