The B1410 code on your 2022 Dodge Durango indicates an open circuit in a heated seat element. This code affects your Durango's seat heating system, signaling the heating element or its circuit has an electrical break preventing heat generation.
Understanding B1410 on Dodge Durango
Heated seats use resistance wire elements in the seat cushion and/or backrest. When energized, these elements generate heat. Code B1410 indicates the control module has detected an open circuit (complete break) in one of these heating elements or its wiring.
Common Symptoms
- Heated seat doesn't warm up
- Heated seat light comes on but no heat
- One seat heats, other doesn't
- Part of seat heats (cushion or back only)
- Heat works intermittently
- Heated seat warning message
Primary Causes
- Broken heating element wire
- Damaged connector at heating pad
- Wiring break under seat
- Heating pad physically damaged
- Seat cover replacement damaged element
- Water damage to heating element
Diagnostic Procedure for 2022 Durango
Using Stellantis scan tool, identify which seat and element (cushion or back) has the fault. Measure element resistance - should be approximately 1-4 ohms typically; infinite resistance confirms open. Inspect wiring under seat for damage. Check connectors at heating pad for loose or broken connections. If aftermarket seat covers were installed, check if installation damaged element.
Repair Solutions
Repair broken wiring if found. Replace heating element pad if element wire is broken (requires seat cover removal). Repair damaged connectors. If aftermarket seat cover damaged the element, proper reinstallation or element replacement is needed. Clear codes and verify seat heats to proper temperature.